Siemens RUGGEDCOM WiN5100, User Manual, Page: 77 / 114

RUGGEDCOM WiN5100/WiN5200
User Guide
Chapter 6
CPE Management Interface
Alarms & Traps 69
Column Description
Values: Off | On
Severity Displays the severity of the alarm.
Values: Clear | Critical | Major | Warning
Category Displays the category for the alarm type.
Values: Restart | Communication | RF | Hardware | Security | Environmental |
Redundancy | Services | Link Status
Last Description Displays a message describing the alarm.
Last Update Time Displays the date and time of the most recent alarm.
SNMP Trap Settings
On the
SNMP Trap Settings
panel, configure the subscriber station SNMP traps. From this pane, you can also
select traps and send them on demand.
NOTE
To send traps, you must have SNMP Trap Destinations configured. For instructions on configuring
SNMP Trap Destinations, see Section 6.2.9, “SNMP Administration”
Procedure: Setting SNMP traps
1. Click the
Management
button. The
Management
options appear in the options pane.
2. In the options panel, click the Alarms and Traps link, and then click the Traps link. The SNMP Trap
Settings pane appears.
Figure 60: SNMP Trap Settings
3. In the Traps Table , review and configure the SNMP traps: