Siemens RUGGEDCOM WiN5100, User Manual

Page: 85 / 114

RUGGEDCOM WiN5100/WiN5200
User Guide
Chapter 6
CPE Management Interface
Configuring the MAC Address Table 77
5. If you changed the value in the Configured LAN IP Address or Configured LAN Mask fields, reboot the
base station:
a. Click the
Management button. The System Functions pane appears.
b. Click the Reboot button. The CPE reboots.
Section 6.3.2.2
Configuring the MAC Address Table
The MAC Address Table displays the MAC addresses learned by the CPE. On the MAC Address Table pane,
you can set the MAC address aging time and clear the MAC Address Table.
Procedure: Managing the the MAC Address Table
1. Click the Network button. The IP Settings pane appears.
2. In the options panel, click the
Ethernet Settings
link, and then click the
MAC Address Table
link. The
MAC
Address Table
pane appears.
Figure 67: MAC Address Table pane
3. In the Aging time [300-1800] sec field, set the MAC address aging time. This is the time until table entries
are removed from the MAC address table. Type a value in the range of 300 to 1800 seconds.
4. The MAC Address Table displays the following information:
Table: IP Settings fields
Field Description
Index Displays a unique identifier for the table entry.