Siemens RUGGEDCOM WiN5100, User Manual, Page: 74 / 114

Chapter 6
CPE Management Interface
RUGGEDCOM WiN5100/WiN5200
User Guide
66 Viewing SNMPv3 Access Groups
Section 6.2.9.4
Viewing SNMPv3 Access Groups
The SNMPv3 Access Groups Configuration pane appears when you click the Access Groups button on the
SNMPv3 Configuration pane. On this pane, you can review the default SNMP v3 access groups.
Procedure: Viewing the SNMPv3 Access Groups
1. On the SNMPv3 Configuration pane, click the Access Groups button. The SNMPv3 Access Groups
Configuration pane appears.
Figure 57: SNMPv3 Access Groups Configuration
2. Review the SNMPv3 access groups in the Access Groups table:
Table: SNMPv3 Access Groups table
Field Description
Group Name The access group name.
Read View The read view for the access group.
Write View The write view for the access group.
Notification View The notification view for the access group.
Section 6.2.9.5
MIB2 System
The SNMP MIB2 settings provide subscriber station system identification information.
On the
SNMP - MIB2 Settings pane, you set the subscriber station contact details, name, and street address.
This pane also displays the read-only SNMP system description, object identifier, system up time, and system
services values.
Procedure: Setting SNMP MIB2 system identification information
1. Click the Admin button. The Admin options appear in the options pane.
2. In the options panel, click the
SNMP
link, and then click the
MIB2 System
link. The
SNMP - MIB2 Settings
pane appears.