SINUMERIK
documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the “Remarks” column.
Status code in the “Remarks” column.
A
New documentation.
. . . .
B
Unrevised reprint with new Order No.
. . . .
C
Revised edition with new status.
. . . .
If factual changes have been made on the page since the last edition, this is
indicated by a new edition coding in the header on that page.
Edition
Order No.
Remarks
08.93
6ZB5 430–0BH02–0AA0
A
11.94
6ZB5 430–0BH02–0AN0
Supplement
07.96
6ZB5 430–0BH02–1AA0
A
Siemens quality for software and training
to DIN ISO 9001, Reg. No. 2160–01
This publication was produced with Interleaf V 5.3
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or
design, are reserved.
Siemens AG 1996. All rights reserved.
Other functions not described in this documentation might be
executable in the control. This does not, however, represent an
obligation to supply such functions with a new control or when
servicing.
We have checked that the contents of this publication agree with the
hardware and software described herein. The information given in this
publication is reviewed at regular intervals and any corrections that
might be necessary are made in the subsequent printings.
Suggestions for improvement are welcome at all times.
Subject to change without prior notice.
Siemens–Aktiengesellschaft
Order No. 6ZB5 430–0BH02–1AA0
Printed in the Federal Republic of Germany
1
Siemens AG 1996 All Rights Reserved 6ZB5 430–0BH02–1AA0
SINUMERIK 805SM / 840C (BS)
3ls
