07.96
Description
3-17
Siemens AG 1996 All Rights Reserved 6ZB5 430–0BH02–1AA0
SINUMERIK 805SM / 840C (BS)
Slave stations of station Nos. 3 and 4 exist.
A SIMATIC S5–115U is available as a master PLC (linear addressing, I/O
range =P, 256 input and output bytes).
The configuration data of the new station are:
Station address and name:
5, SINEC L2–DP module
First free address:
DI: 96
DQ: 96
Address range: 4 bytes Address identifier for 8 digital
inputs: 8DI or 009
Address identifier for 8 digital outputs: 8DQ or 017
Based on the above assumptions, the CONFIGURING screen form must be
parameterized as follows:
((Maske: ))
Program file selected C:
BEISP...
CONFIGURING
Station number: 5
Area:
P
Station type: ...
Station name:
SINEC L2–DP module
First available address:
DE:
96 DA:
96
AE:
AA:
Configuration:
Module address: I:
Q:
((etc.))
STATION LÖSCHEN = DELETE STATION
NEUE STATION = NEW STATION
ADRESS–BELEGUNG = ADDRESS ASSIGNMENT
UEBERNAHME = ENTER
Fig. 3–13
CONFIGURING screen form
((S. 3–25))
3.3.3
Procedure for installation and startup
The following procedure is recommended for installation and startup of a SI-
NEC L2–DP slave module:
1.
Set and check the following data on the module in accor-
dance with Sections 2.1.1 and 2.2.1:
Bus interface
Address range (number of input and output bytes)
Module number (base address) and
Address window.
