Siemens HiPath 4000 Operating Manual Download Page 77

Page: 77 / 135

Conducting calls – enhanced functions

Step by Step

Activating and deactivating forwarding by means
of a switch

If a forwarding destination has been programmed for

fixed forwarding, you can use the switch to activate and

deactivate the forwarding facility. If variable forwarding

is activated, it can only be deactivated with the switch.

Call the system menu.

> <

[

Select and confirm the basic service.

> <

[

Select and confirm.

> <

[

Select and confirm.

> <

[

Select the menu item and confirm. The call forwarding

function is activated.

> <

[

Select the menu item and confirm. Call forwarding is

deactivated. This deletes any destination number pro-

grammed for variable forwarding.

Automatic call forwarding

Forwarding of internal and external calls in the system

can be configured and activated for your line by System

Support. Calls can be rerouted:

• unconditionally

• when the line is busy

• when the call is not answered

Unconditional call forwarding should only be used if the

line is for outgoing calls only (for example, in a lift).

If you have set up fixed or variable call forwarding, and

if the manually programmed forwarding destinations

are not obtainable (for example, because they are busy),

then calls are automatically forwarded to the system

forwarding destinations.

BASIC SERVICE

SWITCHES

FORWARD

ACTIVATE

DEACTIVATE

Summary of Contents for HiPath 4000








































































































































Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands

Siemens HiPath 4000, Operating Manual

Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands