Siemens HiPath 4000 Operating Manual Download Page 95

Page: 95 / 135

Message functions

Step by Step

Deleting mailbox entries

Select the required entry (

Page 84).

The required entry appears.

> <

Press to display the menu selection.

> <

[

Select and confirm to delete the entry.

Ending mailbox viewing

> <

Press to display the menu selection.

> <

[

Select and confirm. Mailbox entries which have not

been deleted remain saved.

Using the missed call list

Callers who have tried to reach you during your absence

are saved in the missed call list. Callback requests

(

Page 84) are also recorded here.

Viewing the missed call list

An advisory message appears and the message key

flashes when one or more information messages or

voice mails have been received for you.

either:

Press the message key.

or:

Call the system menu.

> <

[

Select the menu item and confirm.

The phone number or names are displayed. Phone

numbers that have been viewed are ticked.

MUELLER MOBILE

TH 06.02 09:23

DELETE

Note:

You cannot delete (new) voice messages to

which you have not yet listened in full. To mark a

message as "listened to", press 66 to jump to the

end of the message. Callback requests must also

be deleted from the missed call list (

Page 86).

CANCEL

QUERY NO.

46068

34101

Summary of Contents for HiPath 4000








































































































































Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands

Siemens HiPath 4000, Operating Manual

Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands