Siemens HiPath 4000 Operating Manual Download Page 17

Page: 17 / 135

Conducting calls – the basic functions

Step by Step

Displaying the next entry:

> <

[

Select and confirm the command to view the next en-

try.

Deleting an entry that is displayed:

> <

[

Select and confirm the command.

You receive confirmation: "Callback deleted" .

Terminating callback display:

> <

[

Select and confirm the command.
Press the On-hook key to end the operation.

Consultation

You interrupt your call to consult with a user (including

external users) and then resume the original call.

You are on a call.

Activating and conducting an enquiry/consultation
call

> <

[

Activate enquiry. The current call is placed "on-hold", so

that the first user waits.

Enter the phone number for the consultation call.

The number is dialled. The user answers. The consulta-

tion starts.

The second user is busy or does not answer

”

Cancel the enquiry. You are reconnected to the first

partner.

During the consultation you can:

• book a callback (

Page 6),

• activate call waiting (

Page 74) or

• override (

Page 75).

DELETE

Callback deleted

CANCEL

CONSULT

Summary of Contents for HiPath 4000








































































































































Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands

Siemens HiPath 4000, Operating Manual

Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands