Siemens HiPath 4000 Operating Manual Download Page 41

Page: 41 / 135

Setting the handset

Step by Step

Changing the emergency number

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm. If the check box is

unmarked, then there is no emergency number set.

Delete the old emergency number.

Enter the new emergency number.

Save setting.
Press the On-hook key to end the operation.

Activating/deactivating automatic call
answering

This function allows you to accept calls by removing the

handset from the charging shell.

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm.
Automatic answering is activated.

The activated function is ticked and can be deactivated

by selecting it once more.
Press the On-hook key to end the operation.

H/Set Settings

Handset

Add. Emerg. No

Save

H/Set Settings

Handset

Auto Answer

Summary of Contents for HiPath 4000








































































































































Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands

Siemens HiPath 4000, Operating Manual

Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands