Siemens HiPath 4000 Operating Manual Download Page 48

Page: 48 / 135

Step by Step

Setting the handset

Resetting the defaults

This function allows you to reset your mobile phone to

the defaults, for example, if you want to pass it on to

someone else or reset it.

The handset features are handled as follows:

Resetting

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm. A security check

question appears.
Confirm the security check question. The handset is re-

turned to the default.

Feature

Action

Sound settings

are reset

System registration

is retained

Phonebook

is retained

Redial list

is deleted

H/Set Settings

Handset

Reset Handset

Yes

Note:

For information about deleting the telephone di-

rectory see:

Page 48.

Summary of Contents for HiPath 4000








































































































































Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands

Siemens HiPath 4000, Operating Manual

Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands