Siemens HiPath 4000 Operating Manual Download Page 45

Page: 45 / 135

Setting the handset

Step by Step

Lighting

You can set whether the display should light up when

the handset is in the charging shell or if it is out of the

charging shell.

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm. The mask for setting

lighting is displayed.

In Charger:

Enable or disable activation.

Move the cursor down one line.

Outside Charger:

Enable or disable activation.

Save setting.
Press the On-hook key to end the operation.

Base station name

You can change the base station name that is displayed

in idle status. The handset must be registered at the

corresponding base.

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm.
The selected base is activated. The activated base is

ticked. It can be deactivated by selecting another base.
Change the settings.

Edit Name:

Delete text.

and possibly

Enter the required text and correct individual characters

as necessary using the "Delete" Display key.
Save the settings.

H/Set Settings

Display

Lighting

Save

H/Set Settings

Handset

Select Base

<Base>

Change

Save

Summary of Contents for HiPath 4000








































































































































Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands

Siemens HiPath 4000, Operating Manual

Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands