Siemens HiPath 4000 Operating Manual Download Page 102

Page: 102 / 135

Step by Step

Additional functions

System appointment function

You can arrange for the communication system to re-

mind you of an appointment. For this to happen, you

need to save the times at which you wish to be remind-

ed. This is possible for a period of up to 24 hours in ad-

vance.

Saving an appointment

Call the system menu.

> <

[

Select and confirm the basic service.

> <

[

Select and confirm.

The display indicates whether any reminders are al-

ready saved.

> <

[

Select the menu item and confirm.

Enter the time as 3 or 4 digits, for example, 845 for

8.45 a.m. or 1500 for 3 p.m.

[

Confirm.

Deleting a saved appointment

Open the system menu.

> <

[

Select and confirm the basic service.

> <

[

Select and confirm. A saved reminder is displayed.

> <

[

Confirm if you have saved several reminders.

> <

[

Select the menu item and confirm.
Press the On-hook key.

Using the appointment reminder function

Prerequisite:

You have saved an appointment. The

saved time is reached.

The handset starts ringing.

Press the Talk key. The appointment time is displayed.

Press the On-hook key.

BASIC SERVICE

REMINDER

NEW REMINDER

SAVE

BASIC SERVICE

REMINDER

DELETE

Appoint.:

If you do not accept the reminder, the handset

will ring a few more times and "Appoint." will be

displayed before the reminder is deleted.

Summary of Contents for HiPath 4000








































































































































Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands

Siemens HiPath 4000, Operating Manual

Search results

Summary of Contents for HiPath 4000

Reviews:

Related manuals for HiPath 4000

Brands by name

Popular brands