manualshive.com logo in svg

Siemens C541U, User Manual

The Siemens C541U User Manual is a comprehensive guide that provides detailed instructions for setting up and operating the C541U device. Available for free download from manualshive.com, this manual ensures users can conveniently access all the necessary information needed to maximize the product's functionalities and features.

Share
Download
background image

   

Edition 04.99
Published by Siemens AG,
Bereich Halbleiter, Marketing-
Kommunikation, Balanstraße 73,
81541 München
© Siemens AG 1999.
All Rights Reserved.
Attention please!
As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for 
applications, processes and circuits implemented within components or assemblies.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or 
the Siemens Companies and Representatives worldwide (see address list).
Due to technical requirements components may contain dangerous substances. For information on the types in 
question please contact your nearest Siemens Office, Semiconductor Group.
Siemens AG is an approved CECC manufacturer.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales 
office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. 
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice 
you for any costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!

C541U  User’s Manual
Revision History :

04.99

Previous Releases :

11.97(Original Version)

Page
(previous
version)

Page
(new 
version)

Subjects (changes since last revision)

All chapters
All chapters
1-2
1-2
1-2
1-4
1-5
1-6 to 1-9

1-5

3-1
3-5
3-7

3-8
6-1

6-34
6-53
6-56
6-58
6-61
6-75
6-78
7-2
7-7
7-11
7-12
10-3
10-4 to 10-5
Chapter 11

All chapters
All chapters
1-2
1-2
1-2
1-4
1-5
1-5 to 1-8

1-5

3-1
3-5
3-7

3-8
6-1

6-34
6-53
6-56
6-58
6-61
6-75
6-88
7-2
7-7
7-12
7-13
10-3
10-3 to 10-4
-

All references to C540U is removed.

V

CC

 is changed to 

V

DD

.

USB feature list; Compliant to USB Specification “Rev 1.0”.
Power supply voltage range changed to 4.25V to 5.5V.
Last line; “* P-SDIP-52 package ...” is added.
Figure 1-3; pin 2 is changed to ECAP.
Figure 1-4 is removed.
Table 1-1; column P-SDIP-52 is deleted and any references to P-SDIP-52 is
also removed, the definition of pin 2 is changed to ECAP.
Table 1-2; functionality of Port 1 and 3 is added with the sentence “The pins
with LED drive ... :
Correction in text: 8 KByte (only) on-chip OTP program memory.
Table 3-1; modified with addition of USB Low Speed registers.
Table 3-2; modified with addition of bit DRVI in GEPIR register and USB Low
Speed registers.
Table 3-3; modified with addition of bit DRVIE in DPWDR register.
The first sentence of 6.1 is modified, to remove reference to P-SDIP-52
package.
Seventh line “The following sections ...” is added.
Last paragraph of 6.4.6.1 is added.
Sentence “Sequence of two ...” is added.
The definition of GEPIR register is added with bit DRVI.
The definition of DPWDR register is added with bit DRVIE and XVREG.
Section 6.4.8 Low Speed Mode is added.
Figure 6-39 is removed, as well as any references to it.
Figure 7-2 is modified to include USB Low Speed interrupts.
Definition of DRVIE, SUSPIE and DADDIE are added.
End of first paragraph; “(and GEPIR ...” is added.
Definition of DRVI, SUSP and DADD flag are added.
Figure 10-3 is removed.
Table 10-1; column P-SDIP-52 is removed.
The whole chapter is moved to the C541U Data Sheet.

Summary of Contents for C541U

































































































































































































Reviews:

No comments

Related manuals for C541U

M-Audio Axiom AIR 25 Service Manual preview
Axiom AIR 25
Brand: M-Audio Pages: 26
M Climate Bobbie Installation Instructions Manual preview
Bobbie
Brand: M Climate Pages: 12
Anilam 4200T CNC Manual preview
4200T CNC
Brand: Anilam Pages: 31
Avenview SW-HBT4K-C6-4X4E Quick Start Manual preview
SW-HBT4K-C6-4X4E
Brand: Avenview Pages: 8
Brooks 5851EM Series Installation And Operation Manual preview
5851EM Series
Brand: Brooks Pages: 62
Fisher R622 Instruction Manual preview
R622
Brand: Fisher Pages: 8
iceqube MINI MAX Programming Manual preview
MINI MAX
Brand: iceqube Pages: 2
Cablematic 192DMX User Manual preview
192DMX
Brand: Cablematic Pages: 6
Haiwell H04DT User Manual preview
H04DT
Brand: Haiwell Pages: 23
FlowLine Switch Pak A*13 series Owner'S Manual preview
Switch Pak A*13 series
Brand: FlowLine Pages: 6
Toro LoRa Tempus Air MV User Manual preview
LoRa Tempus Air MV
Brand: Toro Pages: 40
Resol DeltaSol C2 Manual preview
DeltaSol C2
Brand: Resol Pages: 20
EPOS EPOS2 50/5 Application Note preview
EPOS2 50/5
Brand: EPOS Pages: 21
GAC 103 Series Quick Start Manual preview
103 Series
Brand: GAC Pages: 5
Akron Brass 9333 Installation Instructions preview
9333
Brand: Akron Brass Pages: 5
Emerson 299HV Installation Manual preview
299HV
Brand: Emerson Pages: 8
Emerson 851-1000 Installation And Operation Manual preview
851-1000
Brand: Emerson Pages: 18
Emerson 99 Installation Manual preview
99
Brand: Emerson Pages: 8

Brands by name

Popular brands

Load more brands