manualshive.com logo in svg

Siemens ADVIA 1800, Operator'S Manual, Page: 94 / 222

Share
Download
Siemens ADVIA 1800 Operator'S Manual Download Page 94

94 

 

ADVIA 1800 Operator’s Guide

 

Batch transmission to a host computer 

Use the Review/Edit window to transmit selected patient results. The data clean feature is 
available to check the sample results for problems. 

Printing sample data 

The Print report window is only available from the supervisor logon. To print reports, go 
to the Review/Edit window and use the Print report button. 

  CAUTION 

Tests on the Print Report form must be in the same order as they display at the 
System Test List window to avoid incorrect positioning of results on the print 
report. 

Do not modify the order

 of the test names at the System Test list window 

after the initial setup. If you reposition any test names on the System Test List 
window after initial setup, results for samples already run could be associated with 
the wrong test name. 

1.

 

At the Menu Panel, select 

Request

, then select 

Review/Edit

. 

2.

 

At the Review/Edit window, select the

 

Print

 

Report

 

button. 

3.

 

At the Print Report window, select a Sample Type(T) and File Data(F): 

a.

 

If you select Archive in the File Data (F) field, the Filing File Name (I) field is 
activated. 

b.

 

Select the 

Open

 button. 

c.

 

Select a file name at the Open window. 

4.

 

In the Specification range (R) field, select the 

arrow

 in the field and select 

Input

 

Range

 or 

All

 from the list. 

5.

 

In the Number entry format (N) field, select the 

arrow

 in the field and select a format 

from the list. 

6.

 

In the Last no. entry format (E) field, select the 

arrow

 in the field and select a format 

from the list. 

7.

 

In the Report Form File (O) field, select a print format for the report. 

a.

 

Select the 

Open

 button. 

The Open window displays, defaulting to the ETC folder. 

Two sample report formats are available: 
•   the Chart.frm file is formatted for a single sample. 
•   the Consoled.frm file is formatted for multiple samples. 

Customer defined print formats also display in the folder. 

b.

 

At the Open window, select a file name for the report format. 

c.

 

Select 

Open

. 

8.

 

Enter a start number in the Start number (S) field and a last number in the Last number 
(L) field. 

Summary of Contents for ADVIA 1800































































































































































































































Reviews:

No comments