manualshive.com logo in svg

Siemens ADVIA 1800, Operator'S Manual, Page: 2 / 222

Share
Download
Siemens ADVIA 1800 Operator'S Manual Download Page 2

2 

 

ADVIA 1800 Operator’s Guide

 

 

 

The ADVIA

®

 1800 Chemistry system is for

 in vitro

 diagnostic use. 

The information in this guide was correct at the time of release. However,  
Siemens Healthcare Diagnostics continues to improve products and reserves the right to 
change specifications, equipment, and maintenance procedures at any time without 
notice. 

If the system is used in a manner not specified by Siemens, the protection provided by the 
equipment may be impaired. Observe all warning and hazard statements. 

The ADVIA

 

Chemistry system is manufactured in Japan for Siemens. 

The Universal Rack Handling System is manufactured in Germany for Siemens. 

          Manufactured in Japan for:  

 

 

Copyright and trademarks 

ADVIA Centaur

 

and

 

ADVIA are trademarks of Siemens Healthcare Diagnostics. 

Acrobat is a trademark of Adobe Systems Incorporated. 

Clorox is a trademark of The Clorox Company. 

Windows is a trademark of Microsoft Corporation. 

 

 

 

 

© 2015 Siemens Healthcare Diagnostics Inc.  All rights reserved. 

No part of this manual or the products it describes may be reproduced by any means or 
in any form without prior consent in writing from Siemens. 

Summary of Contents for ADVIA 1800































































































































































































































Reviews:

No comments