Siemens ADVIA 1800, Operator'S Manual, Page: 40 / 222

40 ADVIA 1800 Operator’s Guide
Menu Panel
The Menu Panel opens after you start the system software (from the Startup window). The
window contains the buttons shown below. Use these buttons to access other menus.
1
Request
2
Reagent
3
Calibration
4
QC
5
Maintenance
6
Setup
Other tasks accessed from System(s) on the Menu Panel
1. To access the drop-down menu, select
System(S)
at the top left of the window.
2. Perform any of the following tasks:
•
log on at a different access level
•
change the system password
•
display version information, and read or write a memo
•
print the screen
•
log on as a different user
•
exit the system
Logging on at a different access level
Use this procedure to log on as a supervisor or tech_manager (when you start the system,
you are automatically logged in as a user). If you are already logged in as supervisor or
tech_manager, you can log back in as a user.
1. At the System(S) menu, select
Password
.
2. Enter the new user name (access level) and the corresponding password.
Or, do not type a password at the Password window to log in as a user.
3. Select
OK
.
You are now logged in as the new user.
Changing the system password
Use this procedure to change the password for the supervisor ID.
1. At the System menu, select
Change password
.
2. At the Change Password window, enter the old password, then enter the new
password.
3. Enter the new password again in the Confirm password box.
If you are setting the password for the first time, leave the Old password box blank.
4. To change the password, select
Change
.
The next time someone logs in with this ID, the new password will be required.