manualshive.com logo in svg

Siemens ADVIA 1800, Operator'S Manual, Page: 43 / 222

Share
Download
Siemens ADVIA 1800 Operator'S Manual Download Page 43

System Overview

 

43 

 

Sample test status color codes 

The Test Result Monitor window uses seven color codes to represent sample status, 
and the seven codes are displayed on the window. The Review/Edit window uses 
these seven plus an eighth to indicate that a test for the sample was ordered but not 
completed. Discrepancies in color are due to the windows’ displaying different 
information. For example, a "complete" sample appears as dark blue on the Test 
Result Monitor window, indicating that sampling is complete, while in the Review/ 
Edit window the same sample appears as pale blue, indicating that some tests are 
missing. 

 

No sample (white)

 

The position number does not contain a sample for this run 

 

Untested (gray)

 

The run began and a workorder was created for this sample, but the sample was not 
yet aspirated from the sample tray. 

 

In process  (pink)

 

At the Test Result Monitor window – the sample was aspirated from the sample tray 
and was added to the dilution tray.  

At the Review/Edit window – the sample is being analyzed or is being rerun. 

 

Complete (blue)

 

At the Test Result Monitor window – the sample has been aspirated 

At the Review/Edit window – analysis or the rerun for the sample is complete, and 
the resultant data is produced. 

 

Pending run (yellow)

 

The sample was analyzed but it must be reanalyzed. The reanalysis has not yet 
started. 

 

Being rerun (pink)

 

The sample is in the process of being reanalyzed. 

 

Rerun completed (green)

 

The requested rerun for this sample is complete and the resultant data is produced. 

Summary of Contents for ADVIA 1800































































































































































































































Reviews:

No comments