Siemens ADVIA 1800 Operator'S Manual Download Page 51 | Manualshive

Page: 51 / 222

Siemens ADVIA 1800 Operator'S Manual Download Page 51

System Overview

51

IMPORTANT

The operating mode must be READY or WAIT for you to run manual operations.

Also, if you cannot perform an operation due to system restrictions, a buzzer goes off and
a message displays at the Alarm message box (in the Operation Panel). Select

ALARM

in

the Operation Panel for more information and instructions regarding the buzzer.

On-Line Monitor window

Use this window to monitor the exchange of data between the

system

and the host

computer. The monitor displays the data being exchanged and the control signal codes that
ensure accurate transmission of information.

You can view up to 300 data items in the window.

Error Report window*

Use the Error Report window to review system status and error messages. If the column
has a drop-down arrow you can sort the column. You can also search by Samp ID, Safe
No, and Test Name.

1.

At the Operation Panel, select the Error Log icon

.

«
...
49
50
51
52
53
...
»

Summary of Contents for ADVIA 1800































































































































































































































Reviews:

No comments