Siemens Acuson S2000 Instructions For Use Manual Download

Page: 329 / 518

Appendi x C Control Panel

Instructions for Use

C - 3

Control Panel

(For systems without a touch screen)
The ultrasound imaging system has a combination of keys, rotary knobs, push and rotate

controls, and toggle controls. A trackball provides access to on-screen objects. The keys and

controls are logically arranged to require a minimum number of hand and eye movements. The

control panel also includes customizable keys.
Use the system configuration menu to assign the function of the customizable keys.

System Config > Print/Store

Control Panel Lighting

When the ultrasound system is in use, most controls on the main control panel are supported

by backlighting. Exceptions are noted in this chapter.

Color of Lighting

Status

Green

The control is active (in use).

White

The control is inactive, but available for use.

No illumination

The control is not available during the active function.

The alphanumeric keyboard on the control panel is also illuminated.

Summary of Contents for Acuson S2000







































































































































































































































































































































































































































































































































Search results

Summary of Contents for Acuson S2000

Reviews:

Related manuals for Acuson S2000

Brands by name

Popular brands

Siemens Acuson S2000, Instructions For Use Manual

Search results

Summary of Contents for Acuson S2000

Reviews:

Related manuals for Acuson S2000

Brands by name

Popular brands