Siemens Acuson S2000, Instructions For Use Manual

Page: 270 / 518

Appendi x A Technical Des cription
A - 12 Instructions for Use
Accessories and Options
WARNING: Accessory equipment connected to the analog and digital interfaces must be
certified according to the respective EN and IEC standards (for example, EN 60950 and
IEC 60950 for data processing equipment and IEC 60601-1 for medical equipment). Anyone
who connects additional equipment to any of the signal input or signal output ports configures a
medical system and is therefore responsible that the system complies with the requirements of
the system standards IEC 60601-1. Siemens can only guarantee the performance and safety of
the devices listed in the Instructions for Use . If in doubt, consult the Siemens service department
or your local Siemens representative.
WARNING: You must only use the transducers, accessories, cables, and replacement parts for
internal components specified by Siemens to reduce the risk of increased RF (radio frequency)
emissions or decreased immunity of the ultrasound system.
The Siemens-authorized accessories and options for your ultrasound system are listed in this
chapter.
Note: To ensure compliance with the Medical Device Directive, use only the devices listed in this
chapter with your ultrasound system.
Language-Specific Operating System
Includes the operating and general imaging system software, language-specific keyboards, and
system Operating Instructions.

English Language Operating System

International English Language Operating System

German Language Operating System

French Language Operating System

Spanish Language Operating System

Italian Language Operating System