manualshive.com logo in svg

Siemens 7XV5673, Device Manual

The Siemens 7XV5673 Device Manual is the ultimate guide to unlocking the full potential of your product. Easily download this comprehensive and user-friendly manual for free from manualshive.com, providing step-by-step instructions and valuable insights on how to utilize all features efficiently. Get the most out of your Siemens 7XV5673 with this essential manual.

Share
Download
background image

 

 

8

SICAM I/O Unit, 7XV5673, Device Manual

E50417-H1040-C484-A3, Edition 05.2012

5.2

Applications for Remote Transmission of Binary Signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  44

5.2.1

Binary Signal Transmission via Synchronous Leased Line with G703.1/X.21 Connection  . . . . . .  44

5.2.2

Binary Signal Transmission via Two-Wire Copper Cable with Blocking. . . . . . . . . . . . . . . . . . . . .  45

5.2.3

Binary Signal Transmission Across Large Distances via Optical Fiber  . . . . . . . . . . . . . . . . . . . . .  46

5.2.4

Binary Signal Transmission via Synchronous Leased Line with G703.6 Connection  . . . . . . . . . .  47

5.2.5

Binary Signal Transmission via Optical Fiber or Wireless Connection. . . . . . . . . . . . . . . . . . . . . .  48

6

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  49

6.1

General Usage Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  50

6.2

Start and Design of the User Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51

6.2.1

Initial Start of the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51

6.2.2

Enabling JavaScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  52

6.2.3

Number of Connections via HTTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  53

6.2.4

Layout of the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  54

6.2.5

Starting the User Interface during Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  55

6.3

Configuration of the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  61

6.3.1

Device Configuration Procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  61

6.3.2

Access to the Passive Parameter Set by Multiple Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  68

6.3.3

Setting the Operational Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  69

6.4

Value View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  103

6.5

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  104

6.5.1

Firmware Upload  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  105

6.5.2

Date/Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  107

6.5.3

Message Logs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  108

6.5.4

Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  110

6.6

Examples for Parameterization  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  116

6.6.1

Application as Modbus Server via the Ethernet Connection  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  117

6.6.2

Application as Modbus Server via Serial RS485 Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . .  119

6.6.3

Application as I/O Mirror via Ethernet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  120

6.6.4

Application as I/O Mirror via the Optical Fiber Connection, Bidirectional . . . . . . . . . . . . . . . . . . .  122

6.6.5

Application as I/O Mirror via Serial RS485 Connection, Unidirectional  . . . . . . . . . . . . . . . . . . . .  124

6.6.6

Application as Contact Multiplier  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  126

7

Time Synchronization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  129

7.1

General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  130

7.2

Internal Time Keeping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  130

7.2.1

Time Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  130

7.2.2

Status Bits  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  130

7.3

External Time Synchronization via Ethernet NTP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

7.4

External Time Synchronization via Fieldbus  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  132

7.5

Internal Time Synchronization via RTC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  132

8

Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  133

8.1

Communication Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  134

8.1.1

Ethernet Communication  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  134

8.1.2

Serial Communication  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  137

MAN_SICAM_IO-Unit_7XV5673_US.book  Page 8  Thursday, May 10, 2012  10:59 AM

Summary of Contents for 7XV5673



































































































































































































































Reviews:

No comments

Related manuals for 7XV5673

Panasonic VL-SV70 Installation Manual preview
VL-SV70
Brand: Panasonic Pages: 16
Watts LF919 Installation Instructions Manual preview
LF919
Brand: Watts Pages: 12
Magnavox FW 560C Owner'S Manual preview
FW 560C
Brand: Magnavox Pages: 78
Havahart Spray Away 5266 Owner'S Manual preview
Spray Away 5266
Brand: Havahart Pages: 6
Carrier AQUASNAP 30RA "B" Operation & Maintenance Instructions Manual preview
AQUASNAP 30RA "B"
Brand: Carrier Pages: 36
Roger MC16-PAC-2-KIT Installation Manual preview
MC16-PAC-2-KIT
Brand: Roger Pages: 2
M-system R30MS4 Instruction Manual preview
R30MS4
Brand: M-system Pages: 5
Garage Smart Universal XL HD Lifter User Manual preview
Universal XL HD Lifter
Brand: Garage Smart Pages: 21
Waterline Technology AlwaysFresh HFC-1000 Installation And Operation Manual preview
AlwaysFresh HFC-1000
Brand: Waterline Technology Pages: 6
Vaillant VR 940f Installation Instructions Manual preview
VR 940f
Brand: Vaillant Pages: 56
Mercury 350.005UK User Manual preview
350.005UK
Brand: Mercury Pages: 3
Vidos duo M1021 User Manual preview
duo M1021
Brand: Vidos Pages: 34
Axis A9188 Installation Manual preview
A9188
Brand: Axis Pages: 30
Armstrong AGEplus Series Installation And Operating Instructions preview
AGEplus Series
Brand: Armstrong Pages: 2
LEXMAN LEX 845 Instruction Manual preview
LEX 845
Brand: LEXMAN Pages: 28
Clearaudio Smart Phono H V2 User Manual preview
Smart Phono H V2
Brand: Clearaudio Pages: 3
Ebyte ME31-XAXA0404 User Manual preview
ME31-XAXA0404
Brand: Ebyte Pages: 33
Nussbaum TOP LIFT TSK 12000 DJ Operating Manual, Inspection Book preview
TOP LIFT TSK 12000 DJ
Brand: Nussbaum Pages: 56

Brands by name

Popular brands

Load more brands