6 Operation
6.3 Configuration of the Device
73
SICAM I/O Unit, 7XV5673, Device Manual
E50417-H1040-C484-A3, Edition 05.2012
−
Pulse
without retrigger: This indication is output as pulse. If the indication changes again while the
output pulse is ON, the pulse output time is not restarted. This means that a change of the indication
during the pulse output will be ignored.
Figure 6-26
Pulse without Retrigger
−
Pulse with retrigger
: This indication is output as pulse. The output pulse is retriggered if the
indication is changed during the pulse output. This means that the pulse output is extended
Figure 6-27
Pulse with Retrigger
✧
If you have selected one of the two
Pulse
types in the
Operating mode
list box, enter an output time x
(in x *10 ms) into the
Output time for pulse operating mode
field.
✧
Click the
Send
button.
After clicking the
Send
button, the parameters are transmitted to the device but not enabled yet (passive
parameter set).
✧
If you do not want to change any other settings, continue with the
Activation
of the device configuration
according to chapter 6.3.1.3. If you want to change other settings, enter the changes and then enable the
device configuration.
Indication
Output
ON
Binary output with
„Source inverted“ = no
OFF
ON
OFF
Output time
Indication
Indication
Indication
Output
Output
Output
Output
Output
Binary output with
„Source inverted“ = yes
ON
OFF
Output time
Indication
Output
Output with retrigger
Binary output with
„Source inverted“ = no
ON
OFF
ON
OFF
Output time
Output time
Indication
Indication
Indication
Indication
Output
Output
Output
Output with
retrigger
Binary output with
„Source inverted“ = yes
Extended output time
ON
OFF
Extended output time
MAN_SICAM_IO-Unit_7XV5673_US.book Page 73 Thursday, May 10, 2012 10:59 AM
