![background image](http://html1.mh-extra.com/html/sick/safers3/safers3_operating-instructions-manual_1264565077.webp)
To change...
Then...
Function of
inputs and
outputs
Click
Settings
>
Digital Input-Output
Muting
Click
Settings
>
Muting
Sensor
inclination
Loosen the side screws on the sensor and orient the sensors to the
desired inclination.
Sensor number
and positioning
Click
Configuration
4. Click
APPLY CHANGES
.
5. Upon conclusion of transfer of the configuration to the control, click
to print the
report.
7.4.3
Back up the configuration
The current configuration can be backed up, including the input/output settings. The
configuration is saved in a .cfg file, which can be used to restore the configuration or to
facilitate configuration of several safeRS3.
1. In
Settings
>
General
, click
BACKUP
.
2. Select the file destination and save.
7.4.4
Load a configuration
1. In
Settings
>
General
, click
RESTORE
.
2. Select the previously saved .cfg file (see
Back up the configuration above
) and open
it.
Note
: a re-imported configuration requires new downloading onto the control and
approval according to the safety plan.
7.4.5
Display previous configurations
In
Settings
, click
Activity History
and then click
Configuration reports page
: the
reports archive opens.
In
Configuration
click
.
7.5
Other functions
7.5.1
Change language
1. Click
.
2. Select the desired language. The language changes automatically.
7.5.2
Application type selection
In
Settings
>
General
>
Application type selection
.
7 INSTALLATION AND USE PROCEDURES
8027489/2022-03-01 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | safeRS3
77