![background image](http://html1.mh-extra.com/html/sick/safers3/safers3_operating-instructions-manual_1264565072.webp)
72
O P E R A T I N G I N S T R U C T I O N S | safeRS3
8027489/2022-03-01 | SICK
Subject to change without notice
7 INSTALLATION AND USE PROCEDURES
3. Click
Settings
>
Node ID Assignment
.
4. Proceed according to the type of assignment:
If the assignment is...
Then...
manual
1. Click
DISCOVER CONNECTED SENSORS
to display the
connected sensors.
2. To assign a Node ID, click
Assign
for the unassigned Node
ID in the
Configured sensors
list.
3. To change a Node ID, click
Change
for the already assigned
Node ID in the
Configured sensors
list.
4. Select the SID of the sensor and confirm.
automatic
1. Click
DISCOVER CONNECTED SENSORS
to display the
connected sensors.
2. Click
ASSIGN NODE IDS
>
Automatic
.
semi-automatic
Click
ASSIGN NODE IDS
>
Semi-automatic
and follow the
instructions displayed.
7.2.10
Chain examples
Chain with control at the end of the chain and a sensor with bus terminator
Chain with control inside the chain and two sensors with bus terminator