![background image](http://html1.mh-extra.com/html/sick/safers3/safers3_operating-instructions-manual_1264565083.webp)
8.2
Event log management
8.2.1
Introduction
The event log recorded by the system can be downloaded from the safeRS3 Designer
application in a PDF file. The system saves up to 4500 events, divided in two sections.
In each section the events are displayed from the most recent to the least recent. Above
this limit, the oldest events are overwritten.
8.2.2
Download the system log
1. Start the safeRS3 Designer application.
2. Click
Settings
and then
Activity History
.
3. Click
DOWNLOAD LOG
.
8.2.3
Log file sections
The first line of the file reports the NID (Network ID) of the device and the date of the
download.
The rest of the file log is divided in two sections:
Section
Description
Content
Size
Reset
1
Event log
Information
events
Error events
3500
On demand using the safeRS3 Designer
application
2
Diagnostic event
log
Error events
1000
Not possible
8.2.4
Log line structure
Each line in the log file reports the following information, separated by tab character:
l
Timestamp (seconds counter from the latest boot)
l
Timestamp (absolute/relative value)
l
Event type:
o
[ERROR]= diagnostic event
o
[INFO]= information event
l
Source
o
CONTROL = if the event is generated by the control
o
SENSOR ID = if the event is generated by a sensor. In this case is provided
also the node ID of the sensor.
l
Event description
8 MAINTENANCE AND TROUBLESHOOTING
8027489/2022-03-01 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | safeRS3
83