![background image](http://html1.mh-extra.com/html/sick/safers3/safers3_operating-instructions-manual_1264565033.webp)
Data type
Description
Communication
direction
Unsafe
TARGET DATA
l
Current distance and angle of the targets detected by
each sensor. For each protective field of each sensor,
only the closest target to the sensor is considered.
from the control
Unsafe
DIAGNOSTIC DATA
safeRS3 Control PROFINET:
l
internal status with an extended description of the
error condition
safeRS3 Sensor:
l
internal status with an extended description of the
error condition
from the control
4.7
System configuration
4.7.1
System configuration
The control parameters have their own default values that can be modified via the
safeRS3 Designer application (see
).
When a new configuration is saved, the system generates the configuration report.
Note
: after a physical change of the system (e.g. new sensor installed), the system
configuration must be updated and a new configuration report must be generated, too.
4.7.2
Dynamic system configuration
safeRS3 allows a real-time adjustment of the most important system parameters,
providing the means to switch dynamically among different preset configurations. Via
the safeRS3 Designer application, once the first system configuration (default
configuration) has been set, it is possible to set alternative presets to allow a dynamic
real-time reconfiguration of the monitored area. The alternative presets are 3 through
digital input and 31 through Fieldbus (if available).
These are the programmable parameters for each sensor:
l
protective field (from 1 to 4)
These are the programmable parameters for each protective field:
l
angular coverage (from 10° to 100° on the horizontal plane)
l
detection distance
l
safety working mode (
Both (default)
,
Always access detection
or
Always restart
prevention
) (see
Safety working modes and safety functions on page 40
)
l
status of the static object detection option (see
Restart prevention function: static
object detection option on page 43
)
l
restart timeout
All the remaining system parameters cannot be changed dynamically and are
considered static.
4 GET TO KNOW SAFERS3
8027489/2022-03-01 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | safeRS3
33