9.3.8
Diagnostic output connection
Note
: the indicated light turns on in the presence of a failure.
Digital I/O settings (through the safeRS3 Designer application)
Digital input #1 Not configured
Digital input #2 Not configured
Digital output #1 Not configured
Digital output #2 Not configured
Digital output #3 Not configured
Digital output #4 System diagnostic signal
9.4
Parameters
9.4.1
Parameter list
Parameter
Min
Max
Default value
Settings > Account
Password
-
-
Not available
Settings > General
Country
Europe, Rest of the world or list of
countries
Europe, Rest of
the world
Application type selection
Fixed, Vehicle mount
Fixed
9 TECHNICAL REFERENCES
8027489/2022-03-01 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | safeRS3
111
