![background image](http://html1.mh-extra.com/html/sick/safers3/safers3_operating-instructions-manual_1264565067.webp)
7.2.5
Install the sensors
Note
: for an example of sensor installation, see
Examples of sensor installation on
1. Position the sensor as
indicated in the configuration
report and fasten the bracket
with two tamper-proof screws
directly onto the floor or
another support.
NOTICE
Make sure the support does not
inhibit machinery commands.
2. With an Allen key, loosen the
screw at the bottom to pan the
sensor.
3. Pan the sensor until it reaches
the desired position.
Note
: a notch is equal to 10° of
rotation.
4. Tighten the screw.
7 INSTALLATION AND USE PROCEDURES
8027489/2022-03-01 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | safeRS3
67