30
O P E R A T I N G I N S T R U C T I O N S | safeRS3
8027489/2022-03-01 | SICK
Subject to change without notice
4 GET TO KNOW SAFERS3
4.4.4
Main menu
Page
Function
Dashboard
Display main information on the configured system.
Note
: the messages shown are those in the log file. To know
the meaning of the messages, see the chapters on logs in
Maintenance and troubleshooting on page 79
.
Configuration
Define the monitored area.
Configure the sensors and the protective fields.
Define the dynamic configurations.
Validation
Start the validation procedure.
Note
: the messages shown are those in the log file. To know
the meaning of the messages, see the chapters on logs in
Maintenance and troubleshooting on page 79
.
Settings
Configure the sensors.
Choose the protective fields dependency.
Enable the anti-tampering functions.
Synchronize more controls.
Configure the inputs and outputs function.
Configure, show and change the network parameters (if available).
Configure, show and change the Modbus parameters (if available).
Configure, show and change the Fieldbus parameters (if available).
Perform the configuration backup and load a configuration.
Download the log.
Other general functions.
REFRESH
CONFIGURATION
Refresh configuration or ignore unsaved changes.
User
Enable access to the configuration functions. Admin password
required.
Disconnect
Close the connection with the device and allow to connect to another
device.
Change the language.
4.5
Fieldbus communication
4.5.1
Fieldbus support
The safety communication on the Fieldbus interface is supported only in the safeRS3
Control PROFINET.
4.5.2
Communication with the machinery
The Fieldbus makes the following actions possible: