Operating instructions
Chapter
6
RFID Access Management
8018582/2015-11-03
Operating instructions| SICK
51
Subject to change without notice
Commissioning RFID Access
Management
6.5
Setting the transmitting power of the RFID interrogators at the access
points
At the RFID interrogators for the access points, makes sure that the preset UHF
transmitting power is sufficient to read out the UHF tags correctly. The preset transmitting
power of the RFU62x configuration device is sufficient for reading the tags due to the close
proximity of the tag to the RFID interrogator.
6.5.1
Loading the device in the project tree
1. With the configuration PC, go to the RFID interrogator and establish a direct Ethernet
connection between the PC and RFID interrogator.
2. Launch the SOPAS configuration software. The devices connected to the network are
found.
3. If you saved the project when you set up SOPAS, retrieve it now by clicking the
Open last
project
button. The RFID interrogators saved in the project appear in the project tree.
Alternatively, you can open the device to be configured in the project tree via the
Connection Wizard. Select the device in the list of devices that have been found and click
the
Connect to new device
button.
Note