![background image](http://html1.mh-extra.com/html/sick/ram620-10x01/ram620-10x01_operating-instructions-manual_1264684045.webp)
Operating instructions
Chapter
6
RFID Access Management
8018582/2015-11-03
Operating instructions| SICK
45
Subject to change without notice
Commissioning RFID Access
Management
Selecting an interface
1. On the second page of the Connection Wizard, specify which interface is to be used for
the configuration work.
2. If you are carrying out the configuration work via an Ethernet cable (as in the example),
check the
Internet Protocol (IP)
box.
3. Click
Next
to confirm your selection. All connected
RFID interrogator
type devices are
shown with their default IP address.
The red status of the connector symbol indicates a discrepancy between the IP address
number ranges of the RFID interrogator and the configuration PC.