Chapter
6
Operating instructions
RFID Access Management
72
Operating instructions | SICK
8018582/2015-11-03
Subject to change without notice
Commissioning RFID Access
Management
Assigning a read tag
1. Click the
Assign
button. By default, a window opens in which you can enter a number
for the tag.
The card number assignment can be configured on the
Integrator
tab in the
Configuration
menu.
2. Click
Save
to confirm and perform the assignment.
Displaying an assignment
Assigning the tag makes the authorized participant a tag holder. The
Assigned Tag
section
contains the assigned card number and the name of the corresponding participant.
In the row for the selected participant in the list, the red X symbol has been replaced by
a green tick.
Take the tag out of the reading range. The assignment is still shown. However, the gray
circle on the right next to the name of the participant now indicates that the tag is not
currently being read by the configuration device.
Note