![background image](http://html1.mh-extra.com/html/sick/ram620-10x01/ram620-10x01_operating-instructions-manual_1264684059.webp)
Operating instructions
Chapter
6
RFID Access Management
8018582/2015-11-03
Operating instructions| SICK
59
Subject to change without notice
Commissioning RFID Access
Management
6.10
Recording access points
In RFID Access Management, RFID interrogators for the access control system are
recorded as access points. The configuration device itself is also stored as an access
point.
RFID Access Management makes a basic distinction between:
Devices that are permanently accessible to the configuration PC and can be configured
automatically.
Devices that do not have a permanent network connection and are managed locally via
a direct connection to the configuration PC.
Please note: All access points that you record in RFID Access Management must be
accessible to the configuration PC via their IP address at the time they are created.
This also concerns access points that are not permanently connected to RFID Access
Management.
Getting started
In the
Configuration
window, switch to the
Access Point
tab.
Note