![background image](http://html1.mh-extra.com/html/sick/ram620-10x01/ram620-10x01_operating-instructions-manual_1264684073.webp)
Operating instructions
Chapter
6
RFID Access Management
8018582/2015-11-03
Operating instructions| SICK
73
Subject to change without notice
Commissioning RFID Access
Management
6.14
Participants and registered tags in the System Overview
As a final step, use the System Overview to compare the number of recorded participants
and the number of tags registered in the system.
If more participants than tags have been recorded, use the
Tag Management
view to
check which participants do not have tags yet.
6.15
Testing access control
Test the access authorizations of the tags in live mode at every relevant access point and
every relevant time.
Initial situation
Establish the initial situation of the access control. Access to the area that is to be
protected against unauthorized entry is barred.
Performing a test
1. At the access point, place the tag within the reading range of the RFID interrogator.
The RFID interrogator tests the access authorization of the tag.
2. If the RFID interrogator has registered a positive authorization, the digital switching
output activates the opening mechanism of the access point.
3. After entry, the access point must close again automatically.