![background image](http://html1.mh-extra.com/html/sick/ram620-10x01/ram620-10x01_operating-instructions-manual_1264684018.webp)
Chapter
3
Operating instructions
RFID Access Management
18
Operating instructions | SICK
8018582/2015-11-03
Subject to change without notice
System description
The RFID interrogators at the access points are connected to the power supply and, via I/O
connection, to the access control system.
Fig. 4: Operation without connection module
Managing access rights
The
Entry Exit Configuration Software
system component is installed on the configuration
PC. This manages the access rights of persons and vehicles as well as the assignment of
tags. It communicates with the RFID interrogators at the access points and configures the
switching operations for the controlling the access points.
The configuration device for reading the tags is a type RFU62x RFID interrogator with
integrated antenna and a scanning range of up to 1 m. The tag that has been read in is
assigned to a participant in the configuration software. Existing assignments are displayed
in the software's Tag Management view.
Transferring access rights
The access rights managed in ECS are transferred to the RFID interrogators of the access
points via Ethernet and saved there. Communication between the configuration PC and
RFID interrogators takes place via the
EMS
system component. This is installed as
a counterpart to the
ECS
management software in the relevant RFID interrogator via
a microSD card.
If the RFID interrogator delivers a positive read result, this is reported to the access control
system via a digital switching output.
The microSD card also acts as a form of copy protection. It must be inserted into each
RFID interrogator that is managed with RFID Access Management.
Tags
The RFU62x and RFU63x RFID interrogators used in RFID Access Management process all
standard passive tags in accordance with ISO-/IEC-18000-6C and EPCglobal UHF C1G2 in
the regional UHF carrier frequency range.
Note