Operating instructions
Chapter
6
RFID Access Management
8018582/2015-11-03
Operating instructions| SICK
53
Subject to change without notice
Commissioning RFID Access
Management
3. Click the
Start
button.
The reading power is indicated via the green bar.
4. The scanning process runs continuously until you click
Stop
.
The LED indicators on the RFID interrogator can be set via RFID Access Management
(see chapter
6.9.4 Configuring the RFID interrogator indicators
6.6
Changing the password to log in to devices
A password is required to log in to the devices in the SOPAS configuration software.
Default passwords are supplied for the three user levels
Service
,
Maintenance
Technician
, and
Authorized Client
.
User level
Password
Maintenance Technician
main
Authorized Client
client
Service
servicelevel
Change these default passwords accordingly. The SOPAS password will also be stored later
on in the
ECS
system component.
1. Click the corresponding device entry on the menu bar.
2. Select the
Change password
command.
Note