Operating instructions
Chapter
1
RFID Access Management
8018582/2015-11-03
Operating instructions| SICK
7
Subject to change without notice
About these operating
instructions
1.3
Information depth
These operating instructions contain information on the following topics:
•
System description
•
Setup and mounting
•
Electrical installation
•
Commissioning and operation
•
Maintenance and repairs
•
Fault diagnosis and troubleshooting
•
Technical data and dimensioned drawings
When planning and using RFID systems, technical skills are required that are not covered
by this document.
The official and legal regulations for operating the RFMS Access Management must always
be complied with.
The IP addresses are assigned using the SICK SOPAS configuration software.
Please also refer to the information concerning RFID and building security that is available
on the Internet at
There, you can find sample applications and a list of frequently asked questions about
RFID and building security.
1.4
Abbreviations used
Entry Exit Configuration Software = System components for managing the access rights
of persons and vehicles and for assigning tags.
Entry Exit Management Software = System components for communication between RFID
Access Management and the RFID interrogators at the access points
Light Emitting Diode
Radio Frequency Identification = Identification of objects by means of electromagnetic
waves
Radio Frequency Unit = Writer and reader for RFID system
RFID Access Management = System for managing access rights based on RFID
SICK OPEN PORTAL for APPLICATION and SYSTEMS Engineering Tool = SICK configuration
software
Note
ECS
EMS
LED
RFID
RFU
RAM
SOPAS
