![background image](http://html1.mh-extra.com/html/sick/ram620-10x01/ram620-10x01_operating-instructions-manual_1264684050.webp)
Chapter
6
Operating instructions
RFID Access Management
50
Operating instructions | SICK
8018582/2015-11-03
Subject to change without notice
Commissioning RFID Access
Management
1. Switch off the supply voltage for the RFID interrogator.
2. Undo the two Allen screws (A/F 2 mm) to remove the cover.
3. Making sure it is in the correct position (with the contacts pointing to the rear and down,
see the symbol on the card slot), insert the memory card into the slot until it locks into
place.
4. Reattach the cover and tighten the two Allen screws.
5. Switch the supply voltage on again.
Inserting the microSD card into an RFU62x type RFID interrogator
The card slot can be accessed on the RFU62x behind the folding plastic cover.
Fig. 31: Card slot cover (RFU62x)
1. Switch off the supply voltage for the RFID interrogator.
2. Undo the two screws (Torx T8) and lift up the plastic cover.
3. Making sure it is in the correct position (with the contacts pointing to the rear and down,
see the symbol on the card slot), insert the memory card into the slot until it locks into
place.
4. Reattach the plastic cover and tighten the two screws.
5. Switch the supply voltage on again.