Operating instructions
Chapter
6
RFID Access Management
8018582/2015-11-03
Operating instructions| SICK
71
Subject to change without notice
Commissioning RFID Access
Management
6.13
Assigning tags to participants
Tags and participants are assigned and managed in Tag Management at the top right of
the window.
Layout of Tag Management
Tag Management supports two views.
•
The
Assigned Tag
section provides the view of the participant. It shows whether and
which tags have been assigned to the participant. If an assignment has been made,
the name of the participant and (depending on the setting) the card number are shown
here. If the participant does not yet have a tag, the entry reads
Without Tag
.
•
The
Tag Search
section displays the tag that is currently being read by the RFU62x
configuration device. If there is no tag within reading range of the configuration device,
this section will be empty. If a tag is being read, the section states
New Tag
or the name
of the cardholder and (depending on the setting) the card number.
Selecting participants in the list
Select the participant in the list to which the tag is to be assigned.
Reading a tag using a tabletop device
1. Hold a tag within reading range of the RFU62x configuration device. The tag is read.
Please note that the tag is not very responsive at close range.
Therefore, hold the tag just above the reading range.
2. If the tag has not yet been assigned to a participant, the
Tag Search
section states
New Tag
.
Note