![background image](http://html1.mh-extra.com/html/sick/ram620-10x01/ram620-10x01_operating-instructions-manual_1264684052.webp)
Chapter
6
Operating instructions
RFID Access Management
52
Operating instructions | SICK
8018582/2015-11-03
Subject to change without notice
Commissioning RFID Access
Management
6.5.2
Setting the device parameters
The
Antenna Configuration
window allows you to adjust the transmitting power of the
internal
antenna in accordance with your requirements.
1. Go to the SOPAS project tree and select the following entry:
RFID Interrogator
Parameter
Reading Configuration
Antenna Configuration
2. The accessed window takes the form of a tab.
3. Set the optimum transmitting power using the slider. To configure the access control
system, you simply have to adjust the
Read
transmitting power. Specify a power value
that will provide reliable detection of the tags.
6.5.3
Testing RFU transmitting power
Test the settings under conditions that are as realistic as possible and modify them if
necessary. The
Quickstart
window allows you to access all the memory areas of the tag
and to display the tags detected within the receiving range.
Performing a test
1. Go to the SOPAS project tree and select the following entry:
RFID Interrogator
Quickstart
2. Bring the supplied sample tag within reading range of the RFID interrogator.