4
[Design Precautions]
[Installation Precautions]
CAUTION
●
Observe the protective notes and measures.
Observe the following items in order to ensure the proper use of the safety extension module.
(1) When mounting, installing and using the safety extension module, observe the standards and
directives applicable in your country.
(2) When using the safety extension module in EU member states, comply with the following
standards:
• Machinery Directive 2006/42/EC
• EMC Directive 2004/108/EC
• Provision and Use of Work Equipment Directive 89/655/EC
• The work safety regulations/safety rules
(3) Manufacturers and owners of the machine whose the safety extension modules are used are
responsible for obtaining and observing all applicable safety regulations and rules.
(4) The notices, in particular the test notices of this manual (e.g. on use, mounting, installation or
integration into the existing machine controller), must be observed.
(5) The test must be carried out by specialized personnel or specially qualified and authorized
personnel, and must be recorded and documented so that a third party can reconstruct and
retrace the test at any time.
(6) The external power supply of the device must be resistance to a momentary power failure lasting
20 ms as specified in IEC 60204-1.
(7) The safety extension module conforms to Class A, Group 1, in accordance with EN 55011. Group
1 encompasses all the ISM devices in which intentionally generated and/or used conductor-bound
RF energy that is required for the inner function of the device itself occurs.
●
The safety extension module is complied with the "Interference emission" basic specification and
fulfills the requirements of Class A (for industrial use).
Therefore, it is only suitable for use in an industrial environment and not for private use.
●
Wiring and replacement of this product must be performed by qualified maintenance personnel who is
familiar with protection against electric shock.
WARNING
●
Make sure to cut off all phases of a power supply externally before attempting installation or wiring
work. Failure to do so may cause electric shock or damage to the product.
●
Use the product within the generic environment specifications described in the user's manual
(hardware) of the CPU module used.
Do not use the product in areas with excessive dust, oily smoke, conductive dusts, corrosive gas (salt
air, Cl
2
, H
2
S, SO
2
, or NO
2
), flammable gas, vibration or impacts, or expose it to high temperature,
condensation, or rain and wind.
If the product is used in such conditions, electric shock, fire, malfunctions, deterioration or damage
may occur.
Summary of Contents for MITSUBISHI ELECTRIC MELSEC iQ-F FX5
