3 PROCEDURES BEFORE OPERATION
37
3
3
PROCEDURES BEFORE OPERATION
This chapter explains the procedures before operation.
1.
Checking the specifications of a safety extension module
Check the specifications of a safety extension module. (
The system configuration can be checked in advance using MELSEC iQ-F Series Safety Extension Module Configuration
Guide. (
Page 151 How to Use MELSEC iQ-F Series Safety Extension Module Configuration Guide)
2.
Attaching a safety extension module
Attach a safety extension module to a CPU module. For details, refer to the following:
MELSEC iQ-F FX5U User's Manual (Hardware)
MELSEC iQ-F FX5UC User's Manual (Hardware)
3.
Selecting a program of the safety extension module
Select a built-in program using the rotary switch(es). (
Page 112 Programming Method (for FX5-SF-MU4T5/FX5-SF-
4.
Wiring
Wire external devices to the safety extension module.
5.
Programming (for FX5-SF-MU4T5/FX5-SF-8DI4)
Apply the setting. (
6.
Adding a module
Add a safety extension module to the module configuration in GX Works3.
7.
Setting parameters
Configure the automatic refresh setting in GX Works3 as necessary. (
8.
Programming (for FX5 CPU module)
Create sequential programs in GX Works3 as necessary. (
Page 113 Programming Method (for FX5 CPU module))
When turning the power of the target system OFF and ON after performing the procedure 5, turn OFF the
power of the FX5 CPU module and the FX5-SF-MU4T5/FX5-SF-8DI4 simultaneously. After that, turn the
powers ON again simultaneously (within two seconds).
Summary of Contents for MITSUBISHI ELECTRIC MELSEC iQ-F FX5
