Shimadzu GCMS-QP2010 Series, Service Manual, Page: 2 / 168

2
Introduction
This Service Manual is intended for service personnel authorized by Shimadzu Corporation.
It describes maintenance of the GCMS-QP2010 instrument.
Untrained personnel must not attempt maintenance work on the instrument. No
responsibility is accepted for work conducted by untrained personnel.
Safety Precautions
Before starting work, read and fully understand the Danger, Warning, Caution, and Notes
safety items in the yellow page at the beginning of the GCMS-QP2010 System User Guide
(225-00822).
The GCMS-QP2010 contains hot parts, such as the GC2010 heater unit, interface heater
unit, and ion-source heater unit, a high-voltage power supply for the detector unit, and
high-voltage circuits such as the vacuum-measurement circuit. Take sufficient care when
handling high-temperature and high-voltage units.
Disclaimers
(1) The copyright of this document belongs to Shimadzu Corporation, Ltd. The copying or
reproduction of part or all of this manual is prohibited without the permission of Shimadzu
Corporation.
(2) Some parts in this Service Manual may differ from the actual instrument. Due to
product modifications, we reserve the right to change this manual without notice.
(3) This Service Manual is considered complete at the time of production. Any errors or
omissions discovered may not be remedied immediately.
Copyright (C) 2001 SHIMADZU CORPORATION