background image

5-27

SCANNER/INTERNET FAX

TRANSMITTING AN IMAGE

TRANSMITTING AN IMAGE

SENDING AN IMAGE IN SCAN MODE

An image can be sent in scan mode (Scan to E-mail, Scan to FTP, Scan to Desktop, and Scan to Network Folder).

TRANSMITTING AN IMAGE

• If the memory becomes full while the originals are being scanned, a message will appear and scanning will stop.
• When performing Scan to E-mail, take care not to send a file that is too large. In particular, multi-page files tend to be large. 

When sending a multi-page file or other large file, it may be necessary to reduce the number of scanned pages or reduce 
the send size.

Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath 
may damage the original size detector plate and prevent correct detection of the document size.

1

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.

AUTOMATIC DOCUMENT FEEDER (page 1-89)

DOCUMENT GLASS (page 1-91)

• When placing the originals, orient them as shown below.

*To place a large portrait-oriented original, place it as shown in the figure titled "Landscape orientation" and specify the 

placement orientation in step 4.

• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation (

). If placed in landscape (horizontal) 

orientation (

), an incorrect size will be detected. For an 5-1/2" x 8-1/2"R (A5R) size original, enter the original size 

manually.

1

1

ABC

ABC

ABC

ABC

Document feeder tray

Place the original face up.

Document glass

Place the original face down and align the 
corner with the tip of the     mark in the top left 
corner of the document glass scale.

Originals

Portrait orientation*

Landscape orientation*

Summary of Contents for MX-M905





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: