l
F.8L Falco Construction Manual
24–18
Revision 4, March 1, 2002
rings at the correct angle—5.5° nose high from horizontal, in case you wondered. After
this is done, the rings should be notched for the outboard seat supports.
❏
For “open air” wheel well installation—sand the upper wheel well rings to the approximate
contour of the seat supports.
❏
For “open air” wheel well installation—glue the upper wheel well rings and the seat
supports in place.
Figure 23
❏
For “open air” wheel well installation—fit and install the lower wheel well ring. See
Figure 23. At the aft end of the wheel well, install a 20x10 spruce post between the upper
ring and the lower ring. This will support the lower ring while it is being sanded.
Figure 24
❏
For “open air” wheel well installation—install 10x10 spruce gluing strips on the forward
and aft face of fuselage frame No. 5 for the wheel well skin. Before they are installed, these
strips must be cut the angle of the skin. See Figure 24.
❏
For wheel well door installation—fit the four seat supports in place. See Figure 25.
Remember the inboard supports are 60x15 and the outboard supports are 30x15.
Summary of Contents for F.8L Falco
