Sequoia Aircraft Corporation F.8L Falco, Construction Manual

Page: 412 / 423

l
F.8L Falco Construction Manual D–9 Revision 4, March 1, 2002
Bonding of Treated Wood
Woods treated with preservatives can be bonded with Penacolite Adhesives. For
recommendations on specific treatments and bonding conditions, contact Koppers Company,
Inc., Chemical Division.
Precautions
The proper use of the mixed Penacolite Adhesive G-1131-A/G-1131-B should no create
hazardous worker exposures, however, each use location will require specific hazard potential
analysis. Material Safety Data Sheets describing the individual components of this adhesive
should be consulted, keeping in mind that adhesive mixes will have the hazards of both
components until the mixture cures. In every case, high standards of cleanliness should be
maintained. To minimize the possibility of dermititis the use of gloves, protective creams and
frequent washing is recommended. For household use, this product is classified as a hazardous
substance.
Penacolite Resin G-1131-A contains denatured alcohol: Avoid contact with eyes and repeated or
prolonged contact with skin. Wash thoroughly after handling. Wash clothing before reuse.
Avoid breathing vapor or mist. Local or area exhaust ventilation is adequate volume and pattern
may be required to control vapors below OSHA regulations. Flash point is between 73°F and
100°F. Keep away from heat, sparks and open flame. Keep container closed when not in use.
Penacolite Hardener G-1131-B contains paraformaldehyde: May cause allergic reaction. Avoid
contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing dust or
prolonged breathing of formaldehyde vapor. Local or area exhaust ventilation in adequate
volume and pattern may be required to control vapors and dust below OSHA regulations. Keep
container closed when not in use.
KEEP OUT OF REACH OF CHILDREN
For first aid treatment, see container label or Material Safety Data Sheet.
Koppers Company, Inc.
Chemical Division, Pittsburg, PA 15219
Important
All technical advice, recommendations and services are rendered by the Seller gratis. While they
are based on technical data which the Seller believes to be reliable, they are intended for use by
persons having skill and know-how, at their discretion and risk, and are rendered and accepted at
Buyer’s risk. Seller shall not be responsible or liable therefore for results obtained or damages
incurred from their use as set forth herein or otherwise. Such recommendations, technical advice
or services are not to be taken as a license to operate under or intended to suggest infringement of
any existing patent.
Bulletin No. OM-645-Nov. 1982