67
Figure 24 LEDs on the MCU
13.4 Shutting down the battery modules if they are not to be used for some time
A small current will flow from the modules, even if the battery disconnector is switched off, if the B 16 A circuit
breaker is switched on (Standby mode). To prevent a deep discharge if the batteries are put in store for some
time or are not being used, switch the battery module(s) of by setting the OFF <-> ON switch to OFF.
Observe the rules in section 3.3 Storage if the batteries are to be stored. Section 12.7 Operating statuses of
the battery modules will show you how to check the current charge state of your modules.
13.5 Operation of local monitoring
To access the local monitoring or the graphical interface of the SENEC.Home Li, enter the IP address shown
on the front display into the address box in your browser. The local monitoring main menu will open.
Main menu
Figure 25 Local monitoring main menu
