50
Image
Action step
14. Indicate the max. power of the PV inverter.
15. Indicate if and how the dynamic grid feed
limitation is set.
16. Now select the manufacturer, model and num-
ber of certified inverters.
17. Enter the certified PV inverter under PV invert-
er.
If the non-certified PV inverter is the only PV
inverter used, select “Please select ” under
“Manufacturer” and select “None” for “Num-
ber” .
18. Enter the relevant RS485 address and the
phase to which the inverter is connected
under “PV inverter” .
In the case of a PV inverter with a network
interface: Enter the IP address here, instead of
the RS485 address.
19. Confirm your entries by clicking on “Next”.
