60
Image
Action step
10. Access your subsidiary system by accessing its user interface by means of its IP address.
11. Launch the configuration wizard for the subsid-
iary system in the local monitoring system and
switch to “Configuration cascading”.
12. Select “Operation as slave”.
13. Set the Modbus address of the subsidiary
system in the address field.
14. Click on “Next”
15. Make your settings without configuring “Power
Direction Flow Sensors”.
The checkboxes “measures consumption”
and measures generation” must be cleared.
The subsidiary system receives all its com-
mands from the master system, i.e. it needs
no settings for limiting the output, unbalanced
load or other configurations that concern the
mains system.
16. Click on “Next” and finish the configuration
wizard.
