53
Image
Action step
33. Select your package code (optionally).
34. Check the code by clicking “Check code”.
The field: “Redeem code” appears.
35. Redeem your code by clicking “Redeem code”.
You get a note for the successful redemption.
36. Confirm your input by clicking on “Next”.
37. Take a photo of your system as installed. Pho-
tograph the connected battery modules from
a top view and upload it to the wizard.
If this is not possible, upload the photo retro-
spectively at
www.mein-senec.de
. The photo
is a precondition for a full guarantee.
38. Make a note of the SENEC.IES serial number
(may be found on the system case).
39. Check the points listed and check the check-
boxes.
40. Confirm your input by clicking on “Next”.
41. Once you have checked all the checkboxes,
you can finish the installation by clicking on
“Next” and then “Save” .
You will be forwarded to
www.mein-senec.de
.
Configuration is complete.
